Embossed Copper Manny Gasket

Be the first to review this product


Availability: In stock


Quick Overview

This exhaust manny gasket has been a Godsend to us since their inception! Being as practically all exhaust manifolds out there are warped to some degree at the inlet flange, this is where this gasket can take up the slack.

Embossed Copper Manny Gasket

More Views


Check out this exploded view of the "bump out" on the gasket. This is what makes supreme sealing from manny to head a reality. They are also thicker than stock and measure in at .043" thick. The extra thickness further enhances a good seal. Couple that with the crushability of pure, annealed copper with those exaggerated bump-outs, and you have an unbeatable combination. Lincoln never had it so good!



Check it...let's say you have a few busted studs in the head, the head is on the car, and too lazy to extract them (or even next to impossible to correctly do while the head is on the car). THIS gasket will even seal up that manny to the head in most of these extreme cases! We've tried it for yucks on a mule car to test the limits of this gasket and it works! Bear in mind, that was with two studs missing right next to each other. That benny alone could save you a lot of frustration. How did it do it? Those heavy-hitter embossments baby. Think about that. Click to buy.

You may also be interested in the following product(s)

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.