2g OEM Hood "Louvered"

This is freshly painted black but with a twist. This sucker is louvered! If you want the best in heat dissipation under the hood, this will do it! No need to modify your cooling system or add fans...just install this hood and problem is sure to go away! There is also a section where the louvers are reversed to allow fresh air to slam into the air filter area. A great addition to your car. Of course, clean and straight. This is priced at about half of what it would take to paint and louver your own hood. Grab it...stay cool.

$299.00  SOLD!!

LVX-101 Subwoofer Box

Next to brand new! In absolute fantastic shape. 10" vented sub. A heavy sucker. Not a cheap made box. More info available upon request. Just can't recall the specs on it right now.

$200.00

Garrett T-67 BALL BEARING Turbo

This turbo barely has 2000 miles on it. Was rebuilt by FP and custom done with a ball bearing cartridge to boot! Supports over 750 horses and loves the boost. The turbine housing is even CERAMIC COATED! Sports a T4 flange and a 4" inlet. An absolute pissed off monster. A steal at this price! Grab it! The ball bearing CHRA alone cost US 1000 bucks! Someone should shoot us for selling this so cheap.

$989.00 

22g Magnecor KV85 Wires

The standards of industry. We've used Mags exclusively for 9 years. These are in great shape! 8.5mm jacket.

$49.00

2G DNP Tubular Header (T4)

A beauty of a piece. Ceramic coated, flanged for T4 turbos, and has the mount for a Tial 44mm gate. Brand new it would cost a fellow over 700. Get it here and save on a manifold that still has plenty of life left in it! Hell, if you want a great used Tial with it, we can hook you up with that too! We've always run DNP headers and they work fantastic. This could be your lucky day!

$399.00  

2g Lo-Tek Dual Gauge Pod

Molded in black. Brand new piece...never installed! The good stuff...not the flimsy copy cat "made in China" pods out there. Fits 2 1/16" gauges flawlessly. This piece replaces the entire factory a-pillar trim piece.

$35.00

1G Upper IC Pipe

In very good condition. 2.25" pipe. Powercoated in any color that we have. A bolt-on, easy deal. Either the stock BOV or a Greddy will work on this pipe. Includes transitional coupler. Basically, this is a brand new piece!

$150.00  SOLD!!

Engine Parts

We've got stuff laying around the shop that just might be what you're looking for. From intakes to motor mounts. ALL 1G items.  Stocking everything electrical from ignitors to MASs as well.  Drop us an email and ask away.

Note: PLEASE do not ask us if we sell block cores and/or head cores. We don't.

EVO3 O2 Housing WITH External Dump

A FFWD fabbed piece! Not just a piece of stubby pipe welded on to a hacked 1g housing, but done right and clean. This version will not blow carbon soot onto your DP, filter bracket, alternator, etc. This piece has been documented to give a 7 mph increase in trap speed. Of course, fully ported in and out and with a REAL 2.5" outlet. Back in the day, to have us do this mod, would run you 275...porting it another 100. When you receive this piece, it will look like new. Get it, go faster, and be cool...not to mention scaring the bejesus out of people next to you when you lay on the gas and open that flapper door.

$189.00

Unorthodox Racing Ultra S Underdrive Crank Pulley

In fantastic shape and ready to give you quicker revs! Fits on either 1g or 2g cars. Over 180 bones new!

$89.00

GM 3 Bar MAP Sensor

BRAND NEW in box! What more can we say about this little jewel that is the standard sensor of choice for logging boost? Can't beat this price anywhere!

$49.00  SOLD!!

Crower 6 Bolt Con Rods

BRAND NEW in box! The absolute best we've found when it comes to steel rods. Excellent machining tolerances, Superman strength alloy, and the long-time reputation behind them makes these rods a perfect choice for your next 800 plus horse motor. Strong as an Ox. We've used these steel rods exclusively for the past 8 years with no failures. At this price, you can't afford NOT to buy them. You will hardly EVER find these same rods on ebay at a blow out price. Here you go!

$659.00 

Megan Racing 1g FWD Downpipe

This sucker is next to brand new. Probably only had the fumes run through it for mere hours...not thousands of miles. All stainless and 3" with flex. Bolts right up to a 2.5" 02 outlet. Pics available upon request. Absolute beautiful looking piece.

$99.00  SOLD!!

1990 Talon AWD

We have a roller here. No driveline...ready to convert to drag car. That was our intention with it but do not have the time right now. Pretty much all of the interior is still in the car. If you want to make it a street car, you're not too far off! This car has a $3k paint job on it...black with Chameleon flame accents. Straight as an arrow body. Pics available upon request for the serious inquiries...and we do mean serious.

$ Make Offer

Giovanni Wheels (17x7)

DSM bolt pattern of course, and in really great shape! Can't put into words what this wheel looks like so email for pics if seriously interested. These wheels retail for over 1000 bones! They are not ghetto or boyz in the hood lookin' rims. Silver with chrome lip. Nice and classy 5 spoke style.

$389.00 set of four

Greddy 52mm Fuel Pressure Gage

Brand spankin' new in the box! Black bezel with easy to read numbers against white faced background. Electronic and accurate. What more can I say? We dare you to find a better price anywhere!

$99.00