FORWARD FACING FILTER BRACKET

The "TRIPLE F" Bracket Kit

Forward

Facing

Filter

A very trick way to gain extra routing clearance for those running eliminators, gi-normous diametered downpipes and/or dumptubes. No need to have sharp bends just to clear that oil filter jutting out there. This unit will allow you plenty of room.

This is the same filter bracket used in all of our race motors

.

Shown here with the OPTIONAL T fitting and -4 AN male fitting for turbos that are fed its blood from the filter bracket. You can also keep your stock oil pressure sending unit. Just screw it in like it was factory. We even install into the bracket a 90 degree elbow for your idiot light switch for those that never wish to check their oil. Yep.....to put the cherry on top, we include a genuine Mitsu gasket and the correct length bolts to install it too!!

NOTE: Do NOT ask if our fittings are available separately. If you thought you could save a few bucks and find one somewhere else on the cheap, your good deal will soon turn sour when you undergo an Easter egg hunt for the correct brass for this filter bracket. Two words for ya....have fun!

AVAILABLE FOR 7 BOLT MOTORS!

You heard right. The long awaited 7 bolt Triple F Bracket is here! Now you 7 bolt guys don't have to suffer from bracket envy. We got ya covered right here and now. Shown here with the OPTIONAL oil feed fitting. A genuine Mitsu gasket and correct length bolts are also provided. A no hassle gig.

Note: Our filer brackets do NOT have facility for oil cooling. Unless you're pounding on the car doing some canyon racing or Auto-Xing, we believe it isn't necessary to use coolers. None of our drag cars has ever used them.

$75.00 6/7 bolt "Triple F" Bracket w/Gasket and Bolts