New Page 1

 

 

 

 

   Home  |  View Racecart  |  Check Out  |  Contact Us  |  B.O.W. Vault  |  Sik Vid Archive  |  Legal Jargon  |   darren@ffwdconnection.com

 

NAVIGATION

 

 

 

NAVIGATION

Al RACING RODS

BUTCHER CRANK

CAMSHAFTS

COATINGS

COPPER GASKETS

FLEA BAY

GIFTS

GO-GO JUICE

HEADS

PIECES

TOGS

WHAT'S NEW?

FIAV Block-Off plates...for those that have asked, and waited...we got 'em here!


EGR block off plates...they're back...once again!! Alum...copper...alum...can't we make up our minds???


Now you 7 bolt guys don't have to wish and envy. We now have 7 bolt forward facing filter brackets!


A new style of turbo bolts...black oxide. Friendly stuff to you and your wallet. Now offered in combinations!


New black oxide o2 bolt kits...with combinations!


 
BABE OF THE WEEK

(B.O.W.)

Time to put the kiddies to bed...

 

 

 

1G FIAV BYPASS PLATE

 

 

91-94 TBs ONLY

This mod is something we do to just about every 91-94 TB we install. This will do away with possible unpredictable idle RPMs because of that funky-ass wax pellet not doing its job and also will help to reduce incoming charge air temps.

No longer will you have to run those coolant hoses to your TB as well. Much nicer deal when removing the TB in the future as coolant will not have to be drained. And who wouldn't like that?

You say that you're worried about not having fast idle for warm-up because you live in a climate slightly short of the North Pole? Don't even be worried about it. This is NOT a "race only" mod. As long as you have good engine management (Link, EMS, etc.), you won't even know the difference that the FIAV is plugged. What you WILL know is that the possibility of unpredictable idle that could come from a blob of Bubba's dirty earwax not doing what it's supposed to do will be removed for life.

 

JB Weld? 5 minute epoxy? Globs of RTV? You gots to be joking. We sandwich in a .125" thick 6061 aluminum plate specially designed and water-jet cut to block the cooling passage to the FIAV, but will still allow the ISC motor to function just as stock. Done the right way-the sure way-the pretty way.

 

 

 

 

 

 

 

 

How can we offer this plate so cheap?

After a few drinks, dancing, and sleazy strip bars, we were able to coax our water jet guy into offering these plates at a cheap price to us...soooooooo, we're passing the savings onto you!

This is the lowest price offered anywhere on the 'net for this piece, so take advantage before the drug wears off, and the guy comes to his senses!

 

At this sik low price, you now have no excuse for not blocking that hole up. Grab what you can, while you get!

 

 

$16.00 1G FIAV Bypass Plate  (91-94 TBs only)


  1G FIAV BLOCK-OFF PLATE

 

Nothing but a thick slab of Brutus alum!

 

Same as the above rascal, but this jewel is aimed towards the guys that will NOT run an ISC motor and coolant to the throttle body. A complete block-off of everything. Simple...direct...pimpin'. Comes complete with the appropriate shorter allen cap screws so that you won't need to do those crappy midnight parts runs to the 'zone...in stainless of course.

As with our FIAV Bypass plates, this one is priced just as sik! Don't pay 20 or more buckeroos that the other guys out there charge for the same piece. Give your pocketbook a break and start clicking!

 

 

$17.00 1G FIAV Block Off Plate  (91-94 TBs only)

Temporarily out of stock


Last Updated

Copyright ©1999-2013 FFWD Connection. All rights reserved.

darren@ffwdconnection.com